Model 5502 - Guardian 10 kW Air-Cooled Standby Generator with Transfer Switch & Load Center

• True Power® electricl technology
• Two line LCD digital controller (10 & 14kW)
• Automatic transfer switch with built-in priority load center 
• Electronic governor (10 & 14kW)
• Pre-wired external connection box
• External Main Circuit breaker & system status LED (10 & 14kW)
• Flexible fuel line connector
• Composite mounting pad
• Pre-wired conduits
• Natural gas or LP gas operation
• UL 2200 Listed

FEATURES:

• Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose GENERAC power systems with the confidence that these systems will provide superior performance.

• The state-of-the-art power maximizing regulation system is standard and provides optimized fast response to change load conditions and maximum motor starting capability electronically torque-matching the surge loads to the engine.
• Superior harmonics and sine wave form produce less than 5% Total Harmonic Distortion for utility quality power. This allows confident operation of sensitive electronic equipment and micro-chip based appliances, such as variable speed HVAC.

ENGINE

• Generac (OHVI V-Twin) Design
• "Spiny-lok" cast iron cylinder walls
• Electronic ignition, spark advance and compression release
• Full pressure lubrication system
• Low oil pressure shutdown system
• High temperature shutdown

GENERATOR

• Revolving field
• Skewed rotor (8 & 10kW), Skewed stator (14kW)
• Displaced phase excitation
• Automatic voltage regulation
• UL 2200 Listed

TRANSFER SWITCH

• Electrically operated, mechanically-held contacts for fast, positive connections.
• Rated for all classes of load, 100% equipment rated, both inductive and resistive.
• 2 pole, 250 VAC contactors.
• 160 millisecond transfer time.
• Dual coil design.
• Main contacts are silver plate or silver alloy to resist welding and sticking.
• NEMA 1 (indoor rated) enclosure is standard on the 110 amp switch.

CONTROLS

• Manual/Auto/Off switch
• Utility voltage sensing
• Utility interrupt delay
• Engine warm-up
• Engine cool-down
• Seven day exerciser
• Timed trickle battery charger
• Main line circuit breaker

UNIT

• Weather protective enclosure
• Enclosed critical grade muffler
• Small, compact, attractive

INSTALLATION SYSTEM

• Pre-wired external connection box
• 1' flexible fuel line connector
• Composite mounting pad
• Pre-wired conduits
• UL listed wire nuts
• Easy installation - virtually all hardware included & guide